We are in SMTC Co. Day we made a statement the technical specifications of a material that we sell, as well as used in the projects entrusted to us

-------------------------------------------------------------------------------

Sika® MultiSeal-BT 

is a self-adhesive sealing

tape, made of a butyl rubber compound,

protected by a reinforced aluminium film

that lasts and lasts – despite glaring sun,

dry heat and torrential rains.

Perhaps best of all, it applies easily –

simply peel, stick and seal

Characteristics

n  Bitumen free

n  Cold Applied

n  Excellent adhesion properties at low temperatures

n  Excellent heat stability

n  No lowing under heat

n  No Oil Migration

n  Resistant to tear, aging and UV-rays

n  Solvent free

Available in 2 colours (other colours on request)

Aluminium &   Grey

We are in SMTC Co. Day we made a statement the technical specifications of a material that we sell, as well as used in the projects entrusted to us

-------------------------------------------------------------------------------

********************************

henkel cs 360

Product Description

Description

Curing one-component mixtures containing environmental terms with what danger does not generate propellant gases and the polyurethane prepolymer.

Practice Areas

For fixing of door and window frames and to fill the spaces. Electrical installations, the isolation of hot and cold water pipes. Large cracks and filling the gaps.

Product Benefits

- Get adhere to all building materials (polyethylene, polypropylene, except for silicon and teflon).

- Cured foam can be cut, sanded, painted onto the mortar and painted.

- It is resistant to all weather conditions and steam.

- Flame retardant receive.

- Prevents heat loss.

Specifications

Density: 17 + -2 kg / m3 (DIN 53420)

Ignition property: B3 / B2

Tensile strength: 9 N / cm2

Elongation: 25%

Shear strength: 5 N / cm2 (DIN 53 427)

Compressive strength: 4 N / cm2 (DIN 53420)

Tin temperature: the. 5 0C

Tack-free time: approx. 10 min.

Curing time: 15-20 min.

Mechanical strength: 5-8 hours

surface Preparation

Soil surface to be treated must be free of dust and grease. Surfaces must be protected must be sealed with masking tape. Just moisten the surface prior to application will provide faster curing.

application

Once the tube is shaken vigorously for 20-30 moistened surface. Dosage trigger is attached to the tube but should not be tightened too much. The tube is applied to the inverting foam cavity. Taking into account the excess material will grow during the curing foam must be careful not to get bored. Both because it will get passed around will lead to cure the material. Contaminants can be cleaned immediately with acetone or PU foam cleaner. But mechanically it is possible to clean up after the foam hardens. Valve and pipes in Mütakip should be removed from the dried foam. Cured foam on the pipe can be removed with a wire.

Shelf Life

1 year from date of production in dry and cool environment.

Cautions on

Foam should be taken to skin contact during use. The tube contains flammable gas environment during operation must be thoroughly ventilated, open flames should be avoided should be removed and electrical equipment.

We are in SMTC Co. Day we made a statement the technical specifications of a material that we sell, as well as used in the projects entrusted to us

-------------------------------------------------------------------------------------

MASTERSEAL™180

Non-toxic, solvent free, high build epoxy resin, protective coating for concrete and metal

Description

MASTERSEAL 180 is a two-component epoxy resin

system, comprising pigmented base and a hardener,

specifically formulated to protect concrete and steel.

On mixing of the two components, it yields a high

build, chemical resistant protective coating, which

cures to a semi glossy, ultra dense surface that is

easily cleaned, hygienic and safe for contact with

foodstuff and potable water.

Uses

MASTERSEAL 180 is recommended as a protective

coating for the inside surfaces of tanks, sumps and

walls and as a pore free surface sealer resistant to the

growth of bacteria. Applications include:

„ Coating drink water reservoirs

„ Chemicals storage tanks.

„ Dairies & grain silos

„ Pulp and paper plants

„ As a gas and vapour barrier coating to concrete

and metal surfaces.

„ Meat processing, food industries & breweries.

„ Clean rooms in pharmaceutical facilities

„ As protective coating in oil refineries, paper mills,

power stations, garages, hospitals, hangars, etc

Approvals

„ CFTRI approval for use with potable water

Specification Clause:

The non-toxic, high build epoxy coating shall be

MASTERSEAL 180, solvent-less, taint free potable

grade, protective coating. The product shall exhibit

excellent bond strength with the substrate at least

exceeding 1.5 MPa, when tested as per ASTM D4541.

The product shall be formulated to have high build

thickness exceeding 200 microns per coat on average

and shall be applied to achieve overall thickness of

400 microns in two coats. The product must be

approved by reputed institute such as CFTRI for use in

contact with potable water

Chemical resistance

MASTERSEAL 180 is resistant to intermittent spillages

of the following typically encountered chemicals:

„ Formaldehyde, 40% solution

„ Sulphuric Acid, 50% solution

„ Hydrochloric Acid, 50% solution

„ Hydrochloric Acid 5% solution

„ Lactic Acid, 50% solution

„ Nitric Acid, 10% solution

„ Sodium Hydroxide, 50% solution

„ Diesel oil

„ Wine

„ Sea and brackish water

„ Aviation hydraulic fuels (Skydrol)

„ Vegetable oils

Note: Higher concentration of mineral acids may cause

matting of the surface and colour changes.

Directions for use

Surface preparation

It is most important to ensure that thorough surface

preparation is undertaken prior to application of the

MASTERSEAL 180 coating.

Temperature Requirements

„ Substrate temperatures: 15o

C – 35o

C

„ Material temperatures: 15o

C – 30o

C

Very low or very hot temperatures will make

application more difficult and careful consideration

should be given to storage of materials. In the cold

weather conditions, pre-condition materials by

keeping it in a heated room. In hot weather

conditions, some form of air-conditioned storage is

required. Pre-conditioned materials at 20-25o

C will

reduce the possibilities of flash/slow setting and

other defects. 

We are in SMTC Co. Day we made a statement the technical specifications of a material that we sell, as well as used in the projects entrusted to us

-------------------------------------------------------------------------------------

CS 111 ACRYLIC SEALANT

DESCRIPTION

- Acrylic sealant dispersion.

APPLICATIONS

- Construction on the expansion joints between prefabricated elements, the coverage of all kinds of joints and cracks in interior and exterior wood, in the assembly of iron and aluminum frames, all kinds of frames of plaster, windowsills and in combination with other building materials, and the Eternit and aluminum roofing and cladding plate all kinds of building materials are used in combination.

Product Benefits

- One component

- It is not flammable

- Permanent elastic

- Paintable

- Long life

CONSUMPTION

1 obtained by packing length (m);

Triangle joints

joint 400 ml 280 ml 25 kg

sausage cartridge bucket sizes

5 x 5 mm 32 m 22.4 m 133.4 m

5 x 10 mm 16 m 11.2 m 66.7 m

Square and rectangular joints

joint 400 ml 280 ml 25 kg

sausage cartridge bucket sizes

5 x 5 mm 16 m 11.2 m 66.7 m

5 x 10 mm 8 m 5.6 m 33.4 m

APPLICATIONS

- The application surface should be dry and clean. Both sides of the joint to be filled in Duck Masking Tape should be taken.

- Cartridge in: Cartridge mouth is closed. The cannula opening is cut by the thickness of the joint to be treated at an angle of 45 ° C. Henkel cartridge is placed on the cartridge gun. Cannula inserted into the cartridge end. Gun trigger is squeezed product is applied.

- Sausage in: Sausage mouth is cut under the metal hook is placed in the gun and sausage products are applied.

- Sausage in: in Aquarius: the amount to be used dipped into the sausage gun barrel gun and pulled the sealant application is made.

- Sealant after application can be corrected with a sponge soaked in soapy water.

TECHNICAL INFORMATION

Density: 1.5 g / ml

Operating temperature: -18 ° C to 40 ° C

Skin formation time: 15 minutes at normal room temperature

December setting time: 2 days for each 1 mm

Shore A hardness: 20

E 100 module: 5 N / cm2

Temperature range: -20 ° C to 80 ° C

Volume loss: 18%

Continuous flexibility can be achieved: 10%

Max. Filling range: 30 mm

Continuous flexibility can be achieved: 10%

Shelf life: 12 months

We are in SMTC Co. Day we made a statement the technical specifications of a material that we sell, as well as used in the projects entrusted to us

-------------------------------------------------------------------------------------

Sikadur®32

Epoxy Resin Bonding Agent 

------------------------------------------------------------

Product

Description

Sikadur 32 is a solvent-free, two component bonding agent, based on selected epoxy

resins. 

-------------------------------------------------------------

Fields of application Sikadur®

32, provides a bond of far greater strength than the tensile strength of the

concrete itself. Therefore it is suitable for use wherever structural bonding of new to

existing concrete is carried out.

Sikadur®

32, can also be used as a bonding agent on mortar, steel, iron, etc. 

-------------------------------------------------------------

Properties / Advantages Sikadur®

32 is available in two different grades of reactivity: normal and long pot life.

Other benefits are:

n Easy to apply

n Solvent-free

n Unaffected by moisture

n Highly effective , even on damp surfaces

n Workable at low temperatures

n High tensile strength 

----------------------------------------------------------

We are in SMTC Co. Day we made a statement the technical specifications of a material that we sell, as well as used in the projects entrusted to us

-------------------------------------------------------------------------------------

Pattex CF 900

is a two component, fast curing adhesive anchoring reaction resin. It is characterized by a high load carrying capacity and high chemical resistance. The material can be used both indoors and outdoors, in humid conditions and under water. The application of the adhesive is easy and possible with an ordinary gun cartridges.

We are in SMTC Co. Day we made a statement the technical specifications of a material that we sell, as well as used in the projects entrusted to us

-------------------------------------------------------------------------------------

Sikadur®-31 CF Normal2-part thixotropic epoxy adhesive

*************************************************

Product

Description

Sikadur®-31 CF Normal is a moisture tolerant, thixotropic, structural two part adhesive and repair mortar, based on a combination of epoxy resins and special fillers, designed for use at temperatures between +10°C and +30°C.

      /////////////////////////////////////////////////////////////

   Uses                                     As a structural adhesive and mortar for: Concrete elements

Hard natural stone Ceramics, fiber cement Mortar, Bricks, Masonry Steel, Iron, Aluminium Wood

Polyester, Epoxy

Glass

As a repair mortar and adhesive: Corners and edges

Holes and void filling Vertical and overhead use Joint filling and crack sealing:

Joint and crack arris / edge repair

-------- -------------------------------------- -------------------------------------------------- 

Characteristics / Advantages

Sikadur®-31 CF Normal has the following advantages: Easy to mix and apply

Suitable for dry and damp concrete surfaces

Very good adhesion to most construction materials

High strength adhesive

Thixotropic: non-sag in vertical and overhead applications

Hardens without shrinkage

Different coloured components (for mixing control) No primer needed

High initial and ultimate mechanical strength

Good abrasion resistance

Impermeable to liquids and water vapour

Good chemical resistance

----------------------------------------------------------------------------------------------------  

Colours                                Part A:                     white

Part B:                     dark grey

Parts A+B mixed:    concrete grey

--------------------------------------------------